Hello everyone,
Welcome to Miracle Watch Pro, everyone who likes watches is welcome here, and we hope that everyone can buy the products you like.
Today, I’m going to showcase the top-tier products from our factory and highlight the differences between our elite clone and the original product. Yes, it’s all about comparing with the original product. I’ve spent a considerable amount of time preparing for this, even purchasing a second-hand Rolex watch, so that everyone can observe every detail of both products more effectively and directly. Let’s see just how significant the gap is between Miracle Watches Factory’s elite clone and the original product!
This time, we’re comparing the 36mm Rolex Oyster Perpetual 126000. For the original product, I’ve purchased a second-hand item. Naturally, due to its prior use, there might be some dust or other stains on its surface. I hope this won’t detract from everyone’s viewing experience.
Next, let’s take a look at the Front Dial View of the two products.
Let’s go!
Because of the characteristics of the dial, the most important thing about this product is the color.
It is obvious that there is basically no big difference between the two dials. Whether it is the shape, position of the pattern, or the depth of the color, it has reached a very high level. At least you cannot use your eyes to find the difference.
This is also the reason why I chose to use this watch for comparison, because only this kind of dial can let everyone intuitively feel the difference between the two products.
Any difference can be easily observed.
Bezel View
Now, let’s compare the bezels. I’ve zoomed in here so you can see some details of the two products more clearly.
Few people choose to carefully observe this part when purchasing a watch. On one hand, it’s because this area is easily overlooked. On the other hand, compared to the dial, it’s difficult to discern the differences between this area and the original product.
I’ll place the comparison images here so you can take a closer look. Because some factories don’t pay too much attention to these areas during production, it’s worth examining them closely. After all, people usually don’t focus on this part. This means that sometimes there may be unexpected gains in this place
Crystal Side View
The crystal is also one of the main points of contention because there are basically two production methods on the market. One method is to replicate the thickness of the original product, making the case more faithful to the original, but this may sacrifice some tactile sensation. The other method focuses on ensuring a very good tactile feel for the case, but this may result in a different thickness compared to the original product.
Our approach is the latter, aiming to enhance the tactile feel of the product. While this may result in a slight disadvantage in terms of outward appearance, the benefits are significant.
There’s no right or wrong between these two production methods because each has its own advantages and disadvantages. When it comes to this aspect, it ultimately depends on personal preference and what you value more: tactile sensation or outward appearance?
Crown and Stick View
When it comes to the crown and indexes, we’ve become one of the top players in the market. In this regard, unless there’s a significant technological breakthrough, we’re already among the best. You can also compare the differences between our product and the original one.
Luminous Fill View
This part doesn’t pose much technological difficulty, so the top factories in the market all use the same technology. Therefore, regardless of whose product you purchase, the quality in this aspect will be similar. Of course, this assumes that you’re dealing with top-tier factories.
Mimeograph Front View
In this aspect, we have always been an outstanding representative in the watchmaking industry. Both in terms of three-dimensional effects and regularity, we have consistently maintained a perfect level. You never have to worry about us making mistakes in this regard, which is also one of our proudest technological achievements.
Hands and Middle Axle View
Here, we use solid center axes. Generally, this approach better replicates the details of the original product, and the raised solid circular axis is clearer and closer in height. This is also a detail that distinguishes top-tier products from inferior ones because only low-quality products use hollow center axes. On one hand, this lowers costs, but on the other hand, using a hollow center axis lacks any technological merit.
Rehaut View
Regarding this aspect, I don’t have much more to add because it’s not very technically challenging. The difference lies in the calibration of each factory—some may engrave deeper, while others may engrave shallower. It’s a matter of detail rather than technology.
When it comes to details, our standards have always been very strict, so we have a strong say in this area.
I can assure you all that the markings on each of our watches are consistently the same. We don’t have one batch of watches with shallow markings and another batch with deep markings.
Crown Side View
Regarding this aspect, it’s true that technical prowess isn’t necessarily required here. In fact, the techniques involved in this area have been widely shared. Therefore, there’s generally not much difference between top factories in this regard.
Case Side View
The overall shape of a watch has always been the entry-level technology for replica watches. After all, if a replica watch doesn’t even match the shape of the original product, there’s no point in producing it. It would be better to switch industries sooner rather than later.
Endlink View
This is another area where attention to detail comes into play. Generally, top factories use original products as molds, so they replicate based on the data of the original product. There typically isn’t much difference. However, few people choose to inspect this aspect because as long as it looks good, no one really cares if it’s an exact replica of the original product.
other details
Lume View
Movement View
In terms of movement, we equip our watches with movements bearing the same serial number as the original product. This allows us to faithfully replicate the original product in terms of power reserve, accuracy, and watch thickness.
Data comparison chart
Note: All watches were measured in a clamped state, and there may be errors due to slight deviations in caliper positioning.
As you can see, the dimensions of the products perfectly match those of the original products. There is only a 0.1mm difference in thickness, which is actually due to the model of this product. For example, whether it’s Patek Philippe or other Rolex series, we can achieve the same thickness as the original product.
There is also some difference in weight compared to the original product, but this is unavoidable. Replica watches have always been unable to match the weight of the original product because of differences in materials.
For this particular product, since it does not use precious metals, we only have a small difference in weight. However, for some other models, the weight difference in replica watches is much larger.
Many original watches use precious metals such as gold and silver, which have a common characteristic: high density and weight. For example, with the gold-colored Rolex Daytona, the original product may incorporate some gold, while the replica product uses 904L steel. Due to differences in materials, the replica product is 10-20 grams lighter than the original product.
As we are a replica watch manufacturer, our product’s unit price is far lower than that of the original product, possibly not even one percent. Therefore, we cannot use precious metals to make watches, which means we cannot achieve perfect replication in terms of weight. This is not a technical issue but a cost issue.
If we were to add the same amount of precious metal to our watches as the original product, then we could achieve the same weight. However, this would require our watch prices to increase by at least five times or more, which is not worth it.
Well, that’s it for today’s article. Thank you for watching. If there are any mistakes, please correct them. If there’s anything I’ve overlooked, please let me know, and I’ll do my best to address it. Comments and exchanges are welcome!
Disclaimer: Some photos may have deviations from the actual product due to lighting conditions. For details, please refer to the content. The comparison chart is large in size, and you can download it to zoom in.
There are no perfect replicas, only replicas you like.
Here is Miracle Watch Pro. Welcome!